GKTECH 5X100 HUB CENTRIC WHEEL SPACERS

SKU: 5100-30mm

The GKTECH bolt on spacers are used to space the wheel, they not only allow for adjustment of the fitment of your wheels but can provide clearance to the suspension components and even provide more lock!

The wheel spacers are hub centric to suit 56.1mm hub and are manufactured to the highest quality in T6061 Aluminium and then hard anodized to further increase the strength along with grade 10.9 extended studs.

Our unique design uses an oval-shaped stud to prevent any chance of the stud spinning within the spacer and damaging the knurl when over tightened, a common occurrence with generic spacers found on the market.

- CNC machined aluminium T6-6061 construction

- Grade 10.9 studs

- Hub centric to suit 56.1mm

- 100mm PCD with M12 x 1.25 thread

- 60mm long studs

- Oval shaped studs to prevent stripping of the knurl

NOTE: Sold as a PAIR

NOTE: You may need hub centric rings that we have available to suit your aftermarket wheels etc

FAQs

What torque should the nuts be set to?

As per the Nissan tech guide we recommend a torque setting of between 72-87 Ft. Lbs. Anything more than this will strip the stud and is DANGEROUS. The setting of 72-87.

Are these wheel spacers hub centric?

These spacers have an internal diameter of 56.1mm so you will most likely require hub-centric rings to accompany these spacers depending on your rims.

Are these wheel spacers strong?

Yes, these wheel spacers are very strong. The spacers themselves are manufactured from T6-6061 Aluminium and we use grade 10.9 fittings. That said, please note that these are for off road use and are not intended for use on public roads.

Do you have wheel spacers to suit other vehicles?

No, we only sell the products listed on our website. If it's not listed on here, then we don't sell it. We don't do any custom work and only sell off the shelf products so can't make any changes to what is for sale here. Sorry.

Do you have extended wheel studs available on their own?

Yes, we have extended wheel studs available in packs of 10 in our other listings. Please refer to the other listings for more information.

Do you have 4 to 5 stud wheel adapters?

Yes, we have 20mm hub centric 4 to 5 stud wheel adapters available. Please refer to the other listings for more information.

VIP Motorsport is an official UK & European stockist of GKTech products. Our stock is directly linked with GK Tech AU, if the item is out of stock with us it could take up to 2 working weeks to be received.