Available on 0% Finance. Contact us for details.

The Stage 3 Engine Build Kit includes the Stage 1 Kit as well as the Stage 2 Kit and the OEM Oil Pump, set up and VVT Pulley and Water Pump. This is highly recommended to change out when doing a motor build, especially if you have spun a rod bearing or had any oil issues that have lead you to a motor build.  

Included:

Rod Bearings

Main Bearings

Thrust Bearing

Rear Main Seal

Gasket Set

Crank Pully Bolt

Friction Washers x3

Cam Shaft Bolt x2

Cam Shaft Washer x2

VVT Pulley

VVT Solenoid Seal

Flywheel Bolts x6

Timing Chain

Chain Guide

Tensioner Guide

Chain Tensioner

Water Pump

Oil Pump

Oil Pump Gear

Oil Pump Chain

Oil Pump Chain Tensioner

Oil Pump Chain Guide

Oil Pump Pickup Tube (added 5/6/15)

Gasket kit for 2006-2011 3 MPS & 6 MPS includes:

Exhaust Valve Seals (8)

Intake Valve Seals (8)

HPFP Cam Housing Gasket (to head)

PCV Gasket

Valve Cover Gasket

Head Gasket

Front Oil Seal

Intake Manifold Gasket (to head)

Fuel Injector O-Ring (on top side of injector)

Exhaust Manifold Gasket (to head)

Oil Pump Pickup Tube O-Ring

Oil Drain Tube Inlet Gasket (turbo)

Oil Drain Tube Outlet Gasket (turbo)

Oil Filter Housing Gasket (to block)

Water Pump Gasket (internal)

Water Pump Gasket (to inlet)

Water Pump Gasket (to outlet)

EGR Gasket

The 2012-2013 gasket kit comes with all the parts above and the following extra:

O-Rings for fuel rail hard feed line (3)

Grommets for fuel injectors (4 per injector)

Gasket for turbo inlet (manifold to turbo)

Gasket for turbo outlet (turbo to downpipe)

Gaskets for oil feed line (4, to turbo)

Gaskets for water feed and drain lines (4, to turbo)

The Mazdaspeed Engine build kit from VIP Motorsport. Please note we sell all of these kits as individual parts also. As this is a complete kit with a large amount of parts stock does vary – please allow 3-5 days for the parts to arrive with you. Contact us for exact stock.