Tein S Tech Lowering Springs for Toyota Alphard 2.4L/3.0L 02-08 - SKL12-S3B00

[ NOTE ] FT: CUT BUMP RUBBER AT 40MM FROM THE BOTTOM AND USE THE UPPER PORTION. WHEN YOU CUT THE BUMP RUBBER , PLEASE TAKE OFF THE RING.

APPLICATIONS

TOYOTA ALPHARD AS, AX ANH10W 02-08 JPN 2.4L (Lowers -45mm Front / -55mm Rear)

TOYOTA ALPHARD AS, AX ANH15W 02-08 JPN 2.4L (Lowers -40mm Front / -65mm Rear)

TOYOTA ALPHARD MZ, MS, MX MNH10W 02-08 3.0L (Lowers -60mm Front / -50mm Rear)

TOYOTA ALPHARD MZ, MS, MX MNH15W 02-08 3.0L (Lowers -40mm Front / -60mm Rear)

RIDE HEIGHT CHANGE (mm)

See applications above.

TEIN S.Tech Springs are an excellent step towards suspension tuning. They offer approximately a 1.5 inch drop for a more aggressive appearance and increased road holding capability. Designed to be used with OEM or OEM replacement shocks. Each application is road tested in the UK for the proper balance between performance and comfort. Comes with a 1 year limited warranty, spring length is guaranteed not to sag more than 5mm, and be clear of any manufacturer defects.

Additional Features:

Chrome Vanadium SAE9254V Construction

Progressive Spring Rate Design

Includes Silencer Rubber on certain applications

Green Powder Coat Finish

Developed to be used in conjunction with OEM or OEM replacement dampers

1-year Manufacturers Defect and Sag Warranty

Covers over 5mm sag, breakage, deformity, and noise.

Does not cover powder coat finish and rusting.

Contents of Spring Kit:

Main Spring × 4

VIP Motorsport is an official Dealer of Tein suspension in the UK. Our stock is directly linked with Tein, if the item is not in stock with us but is available at Tein UK the lead time is 1-2 days. If not please contact us!