Wilwood BP-10 6812-10 Brake Pads (Set of 4 Pads for 2 Calipers)

PAD,6812-10,DPS/DLS,BLACK,.50 THK,3 HOLE WES123

BP-10 Compound

Medium friction pad

Gradual response, low abrasion on iron rotors

Low to medium wear rate at low temperatures

Low dust and noise

High performance street compound with improved friction, lower wear and lower dust levels than standard replacement pads

Pad Applications

Street use okay

Street

Muscle cars

Drag race

Light to medium braking on dirt including late models and modified

Rotor Material

Steel

Iron

The attached friction data (μ) was recorded through braking cycles from 95 mph to 40 mph at a 0.5g deceleration. Snubs were consecutively done until rotor temperature reached 1300°F. This graph represents average data and is for general trend visualisations only comparing Wilwood pads. Chart data should not be used in comparison with other manufacturer's data. Test conditions, variables, and environment can affect test results.

Temperature range and overall friction value are the primary considerations for pad selection. The pads must maintain the proper amount of friction for stopping power within the temperatures that will be realized on the track. Overall wear rate must also be considered. For most asphalt and road race applications, compounds in the high-temperature range over 1000°F are usually necessary. Dirt track, drag race, and street performance applications usually operate at temperatures between 500° and 1000°F. Keep in mind that these are general ranges and not absolute values. Many factors and unforeseen influences can affect brake temperatures. The best indicator for pad selection will always be on-track performance. If pad fade (friction loss) due to overheating occurs, improved cooling, a heavier rotor, or a higher temperature range pad may become necessary.

Pad Dimensions

Thickness(in) .49

Area(in²) 3

Volume(in³) 1.1

Bedded N

Dust & Noise Ratings

Dust Production Rating Low

Pad Noise Rating Low

UPC 889545033663

VIP Motorsport is a UK Stockist of Wilwood products.