ETS 2015+ SUBARU WRX AND STI FRONT MOUNT INTERCOOLER

Tired of heat soak? We don't blame you!

It's time to upgrade to an intercooler that is designed specifically for the 2015+ WRX with performance in mind.  Unlike other manufacturers we design all of our cores per application, which results in the absolute best performing intercooler on the market.

All of our cores feature an offset and staggered internal and external fin pack.  The external fin pack is dense for maximum heat transfer, where the internal fin pack is less dense for maximum flow and performance.  The key is finding the perfect balance between the two, which is what we do per application. 

It's common for customers to be drawn to cheaper alternatives.  Unfortunately those intercoolers are cheap for a reason!  Most cheap intercoolers utilize a straight through internal fin pack, which acts more like a tunnel than a splitter; This results is much higher/hotter intake air temps, which then leads to timing reduction, knock, mis-fires, detonation, etc.

The ETS 2015+ WRX Intercooler is designed to perform!

We start by locating the inlets and outlets in the middle of the core, which allows for proper air distribution and flow throughout the core.

Each inlet and outlet is hand ported to reduce turbulence and promote maximum flow.  We've seen other manufacturers simply weld on a tube and not debur the inside, which creates excess turbulence and disrupts air flow through the core.

The proof is in the results!

Kozmic Motorsports is the first company in the world to run a 9 second 1/4 mile in a 2015+ WRX. This is car is equipped with an ETS 2015+ WRX Turbo Kit, ETS 2015+ WRX Intercooler, and ETS 2015+ WRX Titanium Piping Kit.  Built and Tuned by Kozmic Motorsports.

Features

Massive 26" wide intercooler core - Designed for maximum heat transfer and minimal pressure drop

Core Size: 26" Wide, 11.37" Tall and 3.0", 3.5", 4.0" or 5.0" Thick.

Precision tig welded construction

Lightweight end tanks design

Hand ported inlet and outlet for optimal flow

ETS logo stenciled on intercooler.

Options

Available in 3.0", 3.5", 4.0" and 5.0" core thickness.

Core Anodizing Options - Blue, Red, Black, Gold, and Purple.

Quality Assurance

Every intercooler is pressure tested to 50 psi

Every product is cleaned and inspected prior to shipment. 

Fins are protected/covered during shipment to prevent damage.

Inlet and outlet tubes are sealed to prevent any packing material from entering the intercooler as well as keep debris out during install.

Fitment

2015+ Subaru WRX

Intercooler Piping Kits (Sold Separately)

VIP Motorsport is an official UK & European Dealer of Extreme Turbo Systems. Our stock is directly linked with ETS USA, if out of stock with us items may take 2-3 working weeks to be received. Image may not be accurate.