PRL Motorsports 2016-2021 Honda Civic 1.5T Intercooler Charge Pipe Upgrade Kit

Part Number

PRL-HC10-CP

Fits all 2016-2021 Honda Civic 1.5T

Fits all variant models including Si, CVT 6MT, RHD, International Models, Etc.

Important Notes:

NO ECU CALIBRATION REQUIRED

ONLY FITS PRL MOTORSPORTS INTERCOOLER UPGRADE. V1 (CAST END TANK) INTERCOOLER DOES NOT REQUIRE ADAPTER

PLEASE EMAIL SUPPORT@PRLMOTORSPORTS IF PAIRING WITH OUR ORIGINAL V1 INTERCOOLER

Technical Notes:

Our upgraded charge pipe kit utilizes smooth flowing, larger inner diameter hot (1.50" factory compared to 2.00") and cold-side (1.5" factory compared to 2.5") for increased airflow and factory diameter hot-side outlet to aid in turbocharger spool. 4-ply silicone couplers are used throughout our design for a couple of reasons:

Heat-soak reduction: Silicone hose offers extremely low thermal heat transfer properties, especially in comparison to steel or aluminum.

Strength and rigidity: The rubber hoses used from the factory are known to experience expansion, which worsens as boost is increased. In time, the rubber construct weakens, causing increased likeliness of a boost leak. Our high-temp, 4-ply silicone with handle the high temperatures of the turbocharger much better than the factory rubber hose(s).

Smooth airflow: Custom molded silicone allows us to offer much higher flowing bends than we could with metal tubing.

Optimal fitment: We have found that the factory rubbers hoses don't offer the most desirable fitment, especially when paired with an aftermarket radiator. Our silicone hose(s) offer even better fitment than factory.

Kits will come with all hardware needed for a seamless install.

Performance Gains:

Increased efficiency & consistency in power delivery

Increased flow over stock charge pipe application

Kit Includes:

(1) Hot Side Charge Pipe

(1) Cold Side Charge Pipe w/ Auxiliary Service Port & Machined Billet Aluminium Flange

(1) -4AN O-Ring to 1/4" Hose Barb (Pre-Installed in Cold Side Charge Pipe) to retain factory vacuum connection

(1) 1/8” NPT Pipe Plug (Pre-Installed in Auxiliary Service Port Bung)

(1) Mounting Bracket for Cold Side Charge Pipe

(4) 4-Ply Silicone Coupler

(8) 304 Stainless Steel Worm Clamp

(2) Charge Pipe Adapters

VIP Motorsport is a UK & European Dealer of PRL Motorsports! Our stock is directly linked with PRL Motorsports USA. On average the lead time is 2 working weeks, however we recommend you contact us for a lead time.