Ford Focus RS (Mk3) 15+ Cobra Cat Back System (Venom) (Valved)
- Brands Cobra Sport
- Product Code: Ford FD95
- Availability: In Stock at Manufacturer
- £1,317.23
-
£1,159.16
- Ex Tax: £965.97
Available Options
Finance available on all orders above £300.
Cobra Sport performance
exhausts enhance the sound, looks and quality of your vehicle giving you the
ultimate driving experience. Our sports exhausts range is fully guaranteed to
give you assurance of our quality.
This performance exhaust
system is made in 3"/76.2mm mandrel bent stainless steel pipework and fits
from the catalytic converter section backwards (Cat-back) these exhausts
replace the centre and rear sections.
This sports exhaust is
part of the Cobra Sport Venom range and is extremely loud. This exhaust is sold
for non road use only and will exceed all legal noise regulations.
System include a
specialised housing plate which will allow the valve motors to remain connected
to the vehicle electronics but not form part of the exhaust, therefore allowing
the use of all drive modes.
All relevant fittings
and gaskets are supplied.
Please Note - This
performance exhaust retains the use of exhaust valves. When switching drive
modes (e.g. Eco to Race mode) your exhaust tone will continue to swop from
quieter to louder tones as before.
Some of the fitted
exhaust images may show alternative parts.
COBRA SPORT REVIEW
The Cobra Sport
development team have created a full range of exhaust systems to take the RS to
the next level through precision design and technology, allowing for increases
in power and creating a sound track worthy of the future classic RS. The
mandrel bent T304 Stainless Steel pipework has been designed to give the engine
maximum room to breathe. The new Cobra Sport systems produce a much deeper
exhaust tone than standard which becomes highly aggressive under load to
produce a pitch perfect soundtrack along with the trademark gargles, crackles
and pops expected from the Focus RS.
The Cobra Sport systems
deliver a significant weight saving over standard. Testing of the non resonated
turbo back system with de-cat resulted in a 13% reduction in weight over the OE
system’s 24.3kg. On offer are a full range of configuration options including a
cat-back exhaust system along with de-cat & sports cat front sections to
form a full turbo back replacement. Taking development for the RS a step
further, Cobra Sport have created a Venom exhaust system (with resonated
centre) which produces a completely unique sound track. This system matched
with the OE standard catalyst recorded the highest sound levels in our tests
registering 101.5db (+22.8db) on the 4,000rpm static test.
The Cobra Sport
development team have produced both valved and non valved sports exhausts for
the Focus RS. The valved exhaust retains the use of O/E exhaust valves, so when
switching drive modes (e.g. Eco to Race mode) the exhaust tone will continue to
change from quieter to louder tones as before. The non-valved option removes the
O/E exhaust valves altogether, and thus removes the drivers option of having
various exhaust tones at the press of a button, however the non-valved Cobra
Sport exhaust has been designed with this in mind.
Matt Thomas, Sales Manager at Cobra Sport says “The many system configuration have a unique blend of sound and tone characteristics. The most dynamic upgrade was the full non resonated turbo back with de-cat which completely altered the sound of the car. At Idle this system only increased the decibel level by +12.5db but once under load the system comes to life, producing a pitch perfect tone at a level of 100db (+21.3db) on the 4,000 rpm sound test to match the aggressive RS styling. The dual tailpipes sit neatly with the stylish rear diffuser. We were keen to make the most of the dual exit design and are excited to offer a choice of bold 4.5" (114.5mm) highly polished slash cut stainless steel tailpipes”.
All photos shown are for
illustration purposes only. Actual product may vary.
VIP Motorsport is an
official dealer of Cobra Sport Exhausts in the UK. Cobra Sport Exhausts are
built to order and have a rough lead time of up to 10-15 working days. Please
contact us for more information.

