Toyota Supra GR MK5 AMS Performance Carbon Fiber Air Intake
- Brands AMS Performance Performance
- Product Code: Toyota AMS.38.08.0001-1
- Availability: 10 - 15 Days
-
£1,050.00
- Ex Tax: £875.00
Finance available on all orders above £300.
AMS PERFORMANCE TOYOTA GR SUPRA CARBON FIBER AIR
INTAKE - AMS.38.08.0001-1
The AMS Performance MKV
Supra Carbon Fiber Intake Kit is engineered to deliver a 25% reduction in
pressure drop which leads to better efficiency and more power. Our Engineers
designed the fully enclosed dry air filter to draw in a larger volume of air
into its hand laid carbon fiber constructed cold air box.
Our AMS Performance
Toyota GR Supra Carbon Fiber Air Intake kit was designed to draw a higher
volume of cold air into the stock turbocharger. With this intake installed, the
factory plastic filter box and plastic intake tube are replaced with our
motorsport grade matte carbon fiber components and dry media air filter. The
MKV Supra Carbon Fiber Air Intake Kit is a vast improvement over the stock
intake system and in our extensive SnailWorks© Engineering Team R&D testing
has shown a massive 25% increase in airflow efficiency!
BENEFITS
25% Reduction in Airflow
Restriction (Pressure Drop)
Draws a Higher Volume of
Cold Air
Enclosed Intake Completely
Seals Out Hot Engine Bay Air
Motorsports Grade, Hand
Laid Carbon Fiber
Durable Billet Aluminum
Mounting Hardware
No Yellowing or Fading
Over Time
Even Distribution of
Cold Air Across Filter
Dry Media Filter means
Easy Cleaning and NO Oil
THE POWER OF FOCUSED ENGINEERING
AMS Performance is an
engineering company first. We have built our decades long reputation as a
leading motorsports aftermarket component manufacturer by creating the highest
performing parts through a focused engineering approach to design. This
engineering process is what makes the MKV Supra Carbon Fiber Air Intake the
best designed intake system on the market The largest component of the MKV
Supra Carbon Fiber Intake is the sealed cold air intake box. Our SnailWorks©
Engineering Team knows that heat is the biggest power robbing factor that
plagues other inferior intake system designs. That is why they designed the air
box to seal out blistering engine bay temperatures. They then took advantage of
the Supra’s existing intake ducting that funnels fresh air into the intake box
by designing an air box opening that matches perfectly to the air duct. Our
engineers did not stop there.
When they focused on the
other system components they found even more places to improve the design. The intake
piping has been increased to 90mm for increased airflow, and to provide future
compatibility with larger aftermarket turbo compressor cover inlets. This is a
massive 26.5% increase in cross sectional area over the factory system, which
has flow reducing corrugations and reduces to 65mm at the compressor cover
inlet. Whether you plan on leaving the turbo stock, or going with an
aftermarket unit, this intake system has you covered.
THE DIFFERENCE IS IN THE DETAILS
You can expect an easy
install without cutting, trimming or taking off any additional components. It
can be installed with basic hand tools in minutes! Couple that with a purpose
built, reusable synthetic high-flow dry media filter, you’ll no longer have to
purchase cheap factory paper filters down the road. The “Dry Media” filter
means just that, no more messy oiling of your filter. Just one more reason why
our intake is the best option on the market. The washable MKV Supra synthetic
media filter was designed and manufactured specifically to fit this high
performance automotive application, and the filter size and configuration was
fine tuned to ensure that it will still provide all the necessary air for any
MKV Supra, including upgraded turbo cars, without any substantial restriction
or compromise in filter efficiency.
The new large AMS airbox
was specifically designed to distribute airflow evenly over the entire
circumference of the intake filter by allowing air to swirl around it. This
means greater distribution of cold airflow across the filter resulting in lower
pressure drop and a longer filter life between cleanings.The AMS Performance
MKV Supra Carbon Fiber Intake Kit is engineered to deliver a 25% reduction in
pressure drop which leads to better efficiency and more power. Because the Supra
uses a torque based ECU tuning strategy, our SnailWorks© Engineering Team has
found that horsepower is not significantly changed with any aftermarket engine
components unless proper ECU calibration is made to take advantage of the new
hardware components. Our team even went so far as to add a much larger
turbocharger to our test Supra, and found 0 hp gains without tuning. Do not be
fooled by competitor’s claims of horsepower gains without ECU calibration! Our
Engineers designed the fully enclosed dry air filter to draw in a larger volume
of air into its hand laid carbon fiber constructed cold air box. The matte
carbon finish perfectly matches the AMS MKV Supra Carbon Fiber Engine Cover.
KIT INCLUDES
Motorsport Grade Matte
Carbon Fiber Sealed Airbox
Motorsport Grade Matte
Carbon Fiber Intake Tube
Rubber Grommet Airbox
Seal
Dry Media Filter
Billet Aluminum Brackets
and Stanchions
All Necessary Mounting
Hardware
Online Installation
Instructions
Applications
2020 Toyota GR Supra –
w/ B58 3.0L Turbo Engine
2021 Toyota GR Supra –
w/ B58H 3.0L Turbo Engine (*Does not fit with factory strut tower bracing unless
additional spacers are used*)
Product Notes
The filter uses
specially designed dry media that allows performance and efficiency to be
restored to near new each time by simply using compressed air (30-40 psi) from
the inside out, making frequent washing unnecessary in order to restore filter
performance. For a deep cleaning from extreme environments, a biodegradable
cleaner such as Simple Green or other mild shop degreasers can be used. Simply
place the filter in a solution or spray the cleaner on the filter. Allow the
solution to loosen the particulate and then rinse thoroughly. Shake the filter
or use compressed air from the inside outward to remove residual water and
allow 24 hours to dry.
*Does not fit with strut tower bracing
unless additional spacers are used*
As these motorsports
grade carbon fiber parts are hand laid, slight imperfections or weave pattern
variances can be expected.
VIP Motorsport is a dealer of AMS Performance
in the UK & Europe! If the item is not showing in stock with us we
recommend you contact us for a lead time!










