The CorkSport Mazdaspeed Performance Camshafts are developed with the latest design, manufacturing, and casting technologies and ground to CNC precision for the best performance for your Mazdaspeed. Near factory idling cams for the daily driver and even the aggressive track driver bringing improvement in throttle response and torque to your Mazdaspeed. #ZoomZoom!

Check out the installation instructions below. Share your performance review with the CorkSport community once installed!

The CorkSport Advantage

Performance Driven

The CorkSport Mazdaspeed camshafts were tested on a fully bolted and CorkSport Turbo equipped 2013 MS3. The performance camshafts provided a respectable TQ/wHP gain across the entire RPM with a peak gain of 22.5whp. This is power you will feel across the whole RPM band, not just a top end improvement in power.

Daily Driver Friendly

Retaining factory idle quality while maximizing horsepower and torque, no worries of a rough loping idle, felt from other camshafts. This gives you an advantage in power without giving away the upgrade on those trips to Mexico.

Direct Fitment

Designed to replace the OEM Mazdaspeed camshafts for the 2007 - 2013 Mazdaspeed 3 and the 2006 - 2007 Mazdaspeed 6 models.

No Regrinds!

CorkSport Mazdaspeed camshafts are manufactured from new castings, hardened and machined to exact tolerances. No cores, exchanges, or long waits for regrinds required.

Installation & Tappet Guide

Clear and concise installation instructions included along with an interactive tappet guide excel sheet available for download.

Camshaft installation is a highly demanding process requiring experience and high attention to detail. CorkSport highly recommends professional installation.

Additional Features

Compatible with: 2007-2013 Mazdaspeed 3 & 2006-2007 Mazdaspeed 6

Camshaft Specifications: Intake .390" Total Lift 215.8 @ .050 Duration, Exhaust .354" Total Lift 204.2 @ .050 Duration.

Designed in America: Designed in Vancouver, Washington, in the Pacific Northwest.

CorkSport Service & Support: Knowledgeable telephone technical question and installation support at (360) 260-2675 and full color installation instructions.

Warranty:

2 year warranty against manufacturing defects. 1 year warranty applies to lobe wear on the camshaft. The warranty will not cover broken cams, lifters, tappets or any other engine parts. Camshafts are considered racing parts and as such this warranty will not cover abnormal wear due to insufficient lubrication, excessive engine heat, valve spring coil bind and cylinder head or guide interference.

*Required Items for Installation*

Two (2) Camshaft Friction Washers (L3K9-12-429)

Two (2) Camshaft Bolts (LF17-12-428)

One (1) Fuel Pump Housing Gasket (L3K9-10-193)

Tappets for valve adjustment

MZR Camshaft Alignment Tool/Plate

MZR Crankshaft TDC Locater Pin

Required: Link for the replacement bucket spreadsheet (needed for the installation of the camshafts)

All Corksport products are imported from the USA to the UK. Our Stock is directly linked with Corksport USA, if the item is not in stock with us it could take up to 10 days to be received. Contact us for definite stock. VIP Motorsport is an Official Stockist of Corksport products in the UK.