HFM.Parts 340mm Rear Rotor Caliper Adaptor 350Z Brembo for Nissan S/R Chassis SR340BREM

HFM.Parts Caliper Adapters have been finely crafted from T6-6061 hard anodized billet aluminium, which is known for its exceptional strength and durability. In addition, they are fitted with stainless steel Heli-Coils to maintain their strength over time. One of the key benefits of these Caliper Adapters is that they have been designed and tested in-house to ensure that they are optimised for performance. HFM.Parts Caliper Adapters are a high-quality, reliable solution for anyone looking to upgrade their braking system. With their exceptional strength, durability, and tested performance, you can trust that they will deliver the results you need, every time.

These adaptors provide the following upgrades:

S Chassis: 258mm to 340mm Rear Rotors

R Chassis: 297mm to 340mm Rear Rotors

R Chassis GTR: 300mm to 340mm Rear Rotors

With 350Z Rear Brembo Calipers

TIP!

Use 350Z Brembo Front Calipers and drill out the holes from M12 to M14 for a super easy front brake upgrade, then match this rear kit with HFM.Parts Front Two Piece Rotors for 350Z

Compatibility

Nissan 180SX SR20

Nissan Silvia S13 SR20

Nissan Silvia/200SX S14

Nissan Silvia/200SX S15

Nissan Skyline R32 GTR

Nissan Skyline R32 GTS-T

Nissan Skyline R33 GTR

Nissan Skyline R33 GTS-T

Nissan Skyline R34 GTR

Nissan Skyline R34 GTT

Requirements

1x Pair HFM.Parts 340mm Rear Rotors

1x Pair 350Z Rear Brembo Calipers

Minimum Wheel Size of 18″

Whats in the Box!

1x Pair HFM.Parts Caliper Adapters

4x HFM.Parts Custom Shoulder Bolts

High Tensile Nuts & Bolts for Fitment

FAQs

Q. Will this fit my vehicle?

A. We have only confirmed fitment for the vehicles mentioned under compatibility. If your vehicle is not listed, then we don't know if it fits.

Q. I have an R33/R34 GTR that already has Brembo calipers; why would I use this kit?

A. In this particular case, the 350Z Brembo caliper is virtually the same as your OEM Brembo caliper, so it wouldn’t be ideal to change it unless it is difficult to find a replacement. We have a 340mm kit for GTR which you can view here, that utilises the OEM Brembo caliper; however, should you decide to swap or use 350Z Brembo calipers, this kit is still suitable.

Q. I have an S-Chassis vehicle. My handbrake is inside the caliper. Can I still use this kit?

A. Yes, however, you will need to upgrade the following components to R-Chassis: Backing plate, handbrake shoes, handbrake cables etc.

VIP Motorsport is an official UK & European stockist of GKTech & HFM products. Contact us for a lead time.