Mazda 3 2.0L 10-13 Corksport Exhaust System
- Brands Corksport
- Product Code: Mazda Axl-6-119-10
- Availability: In Stock at Manufacturer
-
£779.99
- Ex Tax: £649.99
Available Options
Finance available on all orders above £300.
Maximize airflow and
increase power with the CorkSport Power Series Single Exit 60mm Exhaust for the
2010-2013 2.0 liter standard and SkyActiv Mazda 3.
Featuring dual
resonators, a slip fit compression connection to the aft end of the catalytic
converter and a single tailpipe design, the CorkSport Mazda 3 exhaust eliminates
the factory tailpipe muffler and features a non-resonated CorkSport dual wall
90mm exhaust tip.
During testing, the
CorkSport Mazda 3 Power Series Single Exit Exhaust went from a baseline of
118hp/110lb ft. of torque to a respectable 135hp and 123lb ft. of torque at the
wheels when tested with the CorkSport Power Series Short Ram Intake. The 2.0L
results are moderate at the bottom end (with around a 4-5hp/tq gain) below
4000rpm with the majority of the power coming on rapidly at around 4500rpm and held
steadily to the 7000rpm redline. This really shows how constrained the stock
system was for the smaller 2.0L engine.
The CorkSport Advantage:
Features dual
resonators, a slip fit compression connection and single tailpipe design.
Mandrel bent Stainless
Steel T304 construction for corrosion resistance and clean stylish look.
Optional 60mm racepipe
with or without high flow catalytic converter* attaches between the factory
header downpipe flange and the front compression fitting of the cat-back
portion of the exhaust system
Distinctive performance
sound mild but noticable at cruise and idle and a distinctive growl at wide
open throttle and free rev.
Picks up all of the
stock hanger locations.
Power Series exhaust AND
racepipe will not cause a CEL (Check Engine Light).
Corksport Service and
Support: Receive a 2 year warranty, full color installation instructions, all
of the needed installation hardware, and knowledgeable telephone installation
support.
* HIGH FLOW CATALYSTS
ARE NOT AVAILABLE IN CALIFORNIA.
**Installation of the
cat back system requires cutting your factory exhaust system after the second
catalyst. The race pipe versions of the exhaust are bolt on with no cutting
required. See CorkSport FAQ and Instructions for detailed instructions.
All Corksport products
are imported from the USA to the UK. Our Stock is directly linked with
Corksport USA, if the item is not in stock with us it could take up to 10 days
to be received. Contact us for definite stock. VIP Motorsport is an Official
Stockist of Corksport products in the UK.
