The CorkSport Intake Valve Cleaning Tool makes cleaning those pesky intake valves on your direct injected engine cleaner and easier.

The specially designed silicone attaches to most vacuums and provides a good seal to your vehicle’s cylinder head to remove media, carbon deposits, or cleaning chemical. The offshoot provides a good path for an air hose or media blaster without having to permanently modify your vacuum hose.

Have you been putting off cleaning your valves? Pick up a CS Valve Cleaning Tool and make the job much easier.

User-Focused

The CorkSport Intake Valve Cleaning Tool was specifically designed to make cleaning your intake valves as easy as possible. The cone shape was chosen to ensure fitment on a wide variety of vacuum hoses ranging from 1.50 inches to 2.50 inches in diameter as well as seal securely using the included clamp. On the other end of the tool, the opening is sized perfectly to work on the small and large ports of the DISI MZR. Lastly, the shape of the tool and angled offshoot were designed to allow one hand to hold the tool in place while the other easily operates a media blaster within a tight engine bay.

Material Functionality

The CorkSport Valve Cleaning tool is made out of multi-layer reinforced silicone. This material is strong enough to hold its shape when in use yet still has a little bit of flex which is ideal for this application. The flared shape on the engine side of the tool compresses slightly while in use to create a seal for great suction for your vacuum and to prevent messy media and cleaning chemical from getting all over you and your engine bay. The included hose was chosen for its abrasion resistance and sized to fit well on media blaster nozzles. This means your hose won't fail you in the middle of a valve cleaning plus it can be easily removed for refilling the blaster.

What's in the Kit?

2-ply reinforced silicone cleaning tool to interface with the media blaster, vacuum hose and seal against the cylinder head

1.50-2.50 inch worm gear clamp for vacuum hose retention

3/8 inch ID abrasive resistant hose for media blaster attachment

Additional Features

Vehicle Fitment: 2007-2013 Mazdaspeed 3, 2006-2007 Mazdaspeed 6, 2007-2012 Mazda CX-7 Turbo. Can also be used on any direct injected vehicle, but fitment is not guaranteed.(Will not work with Mazda RX8)

Designed in America: Designed and tested in Vancouver, Washington, in the Pacific Northwest.

CorkSport Service & Support: 2-year limited warranty, full-color installation instructions, all necessary components, and knowledgeable telephone support at (360) 260-2675

Advisory:

Designed and tested on DISI MZR engines. Usability on other direct injected engines may vary.

Ensure you go through the proper steps when cleaning your valves to ensure the valves are totally shut during cleaning. Reference your vehicles service manual for further details.

All Corksport products are imported from the USA to the UK. Our Stock is directly linked with Corksport USA, if the item is not in stock with us it could take up to 10 days to be received. Contact us for definite stock. VIP Motorsport is an Official Stockist of Corksport products in the UK.