• Perrin Performance Replacement Dryflow Filter for 15-19 WRX/STI / Universal

Perrin Performance Replacement Dryflow Filter for 15-19 WRX/STI / Universal

0 reviews Write a review

  • Brands Perrin Performance
  • Product Code: Subaru X-PSP-INT-324
  • Availability: In Stock at Manufacturer
  • £69.00
  • £65.00

  • Ex Tax: £54.17
omniPort logo
Finance available from £0 per Month.

Finance available on all orders above £300.

% - £134.91
£65.00
£
£202.36

PERRIN PERFORMANCE REPLACEMENT DRYFLOW FILTER FOR 2015-2019 WRX & STI

This is a direct replacement for the 2015-2019 WRX & STI Intakes. It will also work on any intake system which accepts a 2.75" filter.

 

FILTER TECH

Dryflow filters provide the same level of protection as an oiled filter, but require less maintenance, are less of a mess, and have no risk of over-oiling. The rigid screen inside and around the filter media helps in preventing damage from debris and are ideal for dusty and rough driving conditions.

 

CLEANING INSTRUCTIONS

REMOVE FILTER: Remove filter from the intake pipe and lightly tap off all loose dirt and debris.

APPLY CLEANER: Liberally spray Dryflow cleaner onto both sides of the filter, with the majority of it applied to the dirty side. Allow to soak in for 10 minutes. Do not allow it to dry on the air filter.

RINSE FILTER: Rinse off the filter element with cool or warm (not hot) water from the clean side out in order to flush the dirt out of the filter. It may be necessary to use your fingers on the hose, to apply light water pressure. Repeat steps 2 and 3, until the water flowing through the media is completely clear of any dirt and debris.

DRY & RE-INSTALL FILTER: After rinsing, gently shake off excessive water and allow to dry naturally or carefully use compressed air to help speed the drying cycle. Re-install the filter onto the intake system, airbox or custom assembly once it is dry or just slightly damp. Follow all original installation instructions.

 

SPECS

Overall Width 6"

Overall Height 11"

Inside Diameter 2.75"

Filter Type Dry media, dryflow

 

IN THE BOX

 (1) PERRIN Dryflow Filter

 

COMPATIBILITY

This is a direct replacement for PERRIN Performance 2015-2019 WRX & STI intake systems.  This filter will also work on any intake system which accepts a 2.75" filter.

 

VIP Motorsport is an official UK & European stockist of Perrin Performance products. Our stock is directly linked with Perrin Performance USA, if the item is out of stock with us it could take up to 2 working weeks to arrive with you.

Write a review

Note: HTML is not translated!
    Bad           Good