Pedders Rear Suspension Conversion Kit. Standard Height. Subaru Outback, BH 803053

Confirmed Applications

Subaru Outback 1998-2003 BH 2.5lt 4cyl ULP

Subaru Outback 1998-2003 BH 3.0lt 6cyl ULP

Pedders Rear Suspension Conversion Kit. Standard Height. Subaru Outback, BH

This kit is used to replace the Original Self-Levelling Suspension.. This kit is a direct bolt in replacement. NO modifications to the vehicle are required. No extra parts are required.

"Will my vehicle really be returned to its original Ride height?" Yes, definitely!

The original Self Levelling system has a much weaker spring than would normally be used to carry the weight of the car. In this application, the shock absorber has a hydraulic self levelling function built into it. This function, unlike a normal shock absorber, also carries part of the vehicle weight.

As a consequence, failure of the self levelling function is what causes the vehicle to sit low as it is now solely reliant on the spring to support the weight of the vehicle.

Pedders Suspension overcome this by supplying a matched set of dampers and springs specifically for this purpose. You can buy with full confidence that the vehicle will be the correct height and your troublesome and expensive self levelling dampers consigned to history.

Please note our vehicle height measurements are based on 16 inch wheels. This does not mean it will only fit cars with 16 inch wheels. The kit WILL fit irrespective of wheel size.

Key features

Supplied as a MATCHED SET of pre-assembled suspension components including Pedders gas struts, Pedders coil springs, bump stops, boot kits and strut mounts.

Reduced installation time as the components are supplied pre-assembled and ready for direct fitment.

Individually shock dyno tested as a complete suspension system mated to your existing O.E. hardware for quality assurance & performance.

The Pedders EziFit 803053 will restore the height of your Outback.

Pedders SportsRyder gas struts in the EziFit kit are made from heavy duty twin-tube gas construction technology & heavy duty reinforced double welded mountings for long term durability.

The complete kit is a system designed and valved to work together.

Also an easy & low cost way to convert from coil overs.

Vehicle Height Information

Rear: 640mm with 16 inch wheels.

Notes: Heights should be measured as shown in the secondary picture.

Contents of Kit 803053 (Pedders Part Numbers)

122310 x 2 – Rear Shock

2938 x 2 – Rear Spring

VIP Motorsport is an Official Dealer of Pedders suspension in the UK & Europe. Contact us for a lead time.